Matt Danger's B5 S4 Owner Log

I’ve been wanting to install some height adjustable coilovers ever since I bought the car. I went back and forth on what to buy. For a while I wanted a set of Vogtland GTs because of the good reviews they were receiving. Unfortunately, it seems that their quality control has taken a dive and many owners are complaining of low speed clunking coming from the rear. So then I thought I might purchase a set of Konis, but I worried they would be too soft.

I was exhausted with the research and the idea of spending over $1000 for something that I might not be happy with. So I went the opposite route and bought one of the lowest priced coilvers on the market: Vmaxx.

I picked the Vmaxx setup because of the price and because Strat, the US distributor, is right down the street in Victor and I wouldn’t have to pay shipping costs. The guys at Strat were very nice and answered all my questions. Their kitchen is nicer than the one in my apartment…

This weekend I installed them. I didn’t attempt to remove the front upright pinch bolt. Instead, I disconnected the shock at the tower and at the lower control arm. I then disconnected the front sway bar and lowered it, so I could push the upright downwards and lift the shock over and out the front. I used a floor jack to compress the shock for a little more clearance. This whole process went pretty quickly, with the exception of a stripped sway bar bolt.

Removing the rears were more difficult because several bolts were corroded. My weak Craftsman impact wouldn’t budge them, so I had to use a long breaker bar. This took forever. After the old coilover and housing came out I had problems getting the new shock up into the housing. The mount was slightly larger than the housing so I had to break out the grinder and trim it. I then used a punch to line up the shock mount holes in the housing.

This was when I first set the height.

The front was too close so I raised all 4 corners up 1/2″. I still need to dial in the height, maybe sometime this week, and probably roll the fenders a little. When turning, the driver side tire occasionally rubs the liner.

My old setup was a Bilstein shock/spring combo. They had almost 100k on them and one of the rear shocks were blown so the old ride quality was poor. My initial impressions of the ride quality with the Vmaxx are good. I think they’re a little software than I’d like. I would not say they’re bouncy. I’m sure they’re no match to a more expensive setup but for me they’re fine.